Distributors

[fahrvegnugen at cox.net (David Utley)]

> 
> From: "Dan Bubb" <jdbubb@ix.netcom.com>
> Date: 2004/08/27 Fri PM 05:06:29 EDT
> To: <SequoiaGLX@twcny.rr.com>, 
> 	"Mike Smith" <smithma7@yahoo.com>
> CC: car <scirocco-l@scirocco.org>
> Subject: Re: Distributors
> 
> On a 16V if it's leaking oil then it's the little shaft seal inside. You can get it out, but it's
> retained by a serated edge disc and I'm not sure that once you remove it that it will be retained
> properly since the edge is sort of staked in place and you break off the staking material by
> removing it.
> Plus the commonly available shaft seals are .5mm small on the shaft size, so don't know how well
> they would last.
> Dan

I have heard that they are commonly available in Canada, but have no experience...  Any of our Canuck listers have experience?

BTW, where the f*ck did the word canuck come?

Cheers,
   David


---Chrome don't get you home.---