[non] rabbit speaker wiring

[tberk at sbcglobal.net (T Berk)]

Marc_Scirocco_Qu?bec wrote:
> Remove the passenger side door sill, and lift the carpet a bit. You should
> be able to run your wiring underneath the carpet passenger side.
> 
> This is what I did on the '83 for additional 6x9 speakers. It was also
> easier to do with the passenger seat removed.
> 
> Cheers.
> 
> Marc


Speaker source down one side, if using any powered components, run the 
power down the driver's side- keep power and signal separated.

Lamp cord is a very cheap and durable source for speaker wire, also 
don't forget to respect phase; all speakers should have a positive to 
positive connection with the radio/amp. Same with the negative side. 
Mixing will reduce speaker output effectiveness.

Grounding the case of the radio to the chassis is also a good idea, 
just a few random thoughts that may not be common knowledge.


TBerk