[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Rear wheel bearings 16V...

PB's right, no press needed.
I use a long drift and a hammer....and proceed very carefully.

Larry
  ----- Original Message ----- 
  From: Patrick Bureau 
  To: 'Kent McLean' ; Scirocco-L@scirocco.org 
  Sent: Sunday, April 04, 2004 5:46 AM
  Subject: RE: Rear wheel bearings 16V...


  You need a press for what ?

  You need tool to pop them in and out but you don't need a press at all for
  the rear bearings
  Check my tech note : http://ats.longcoeur.com/Technotes/reardisc/index.html

  -
  ATS - Patrick Bureau - http://ats.longcoeur.com - 
  A1 eBay Sales: http://tinyurl.com/22e5b