[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
End play
- Subject: End play
- From: falzsf at mts.net (shawn f)
- Date: Sun Sep 28 17:30:48 2003
Well i assembled the crank into the main bearing and used white grease. LD said not too so i will take it apart and re assemble with the proper assembly lubs, OOPS. Now i measure end play and it wasnt even .001 of movement and it should be .0028 - .0067. So i guess i need to sand some of the side of bearing number 3. It is the one peice one. UI belive that it was i do to increase the endplay. I have to push/pull pretting hard and dont even get a thou.
Just double checking this......
- Follow-Ups:
- End play
- From: marc_scirocco at sympatico.ca (marc_scirocco Québec)
- End play
- From: mardak at cogeco.ca (Mark)
- End play
- From: MK1Scirocco16v at comcast.net (Dave Ewing)