Transmission questions ...

[adrian.culda at sympatico.ca (Adrian)]

That doesn't really matter...
This car will not be my daily driver... It will be my fun/weekend car :P
I'm getting the SEQSHIFT which will a bit on the fun side to drive :)
Here's a link :
http://www.seqshift.com/main.phtml?page=programS

LMK what u guys think .. :)
Adrian C.

Project Scirrocco R2 - 16V of Turbocharged Furry !!
( SOON to Terrorize the local Hodus :P )


-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Euroroc II
Sent: September 22, 2003 11:04 AM
To: scirocco-l@scirocco.org
Subject: RE: Transmission questions ...

If you have the brackets and the clutch conversion kit you still need
the 
shifter from a cable shifter car and need to route the cables under or 
around the airbox which I belive is the most difficult part of the job.

-Raffi


At 11:23 AM 9/22/2003 -0600, you wrote:
>1.-> Mounting brackets/points???
>
>Need different mounts.  Eric S knows of someone who makes them I think
>$125/set
>
>2.-> What Axles would I end up using??? Hybrid scirocco-passat axles???
>I       would end up using stage 2 or stage 3 axles anyway...but need
to
>know    for sure.
>
>Same axels should work fine if you have 100mm flanges right now.
>
>Here is a site with some good info:
>http://www.gironet.nl/home/cillari/gearbox.htm
>
>-----Original Message-----
>From: scirocco-l-bounces@scirocco.org
>[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Adrian
>Sent: Monday, September 22, 2003 2:12 PM
>To: scirocco-l@scirocco.org
>Subject: Transmission questions ...
>
>Hey Guys...
>  I need a bit of help...
>I'm getting ready to swap the old motor out with the new one.
>Since I heard that O2O Transmissions are quite weak I though I'd swap
>O2A in there. Complication wise, is there anything major that I have to
>worry about???
>
>1.-> Mounting brackets/points???
>
>2.-> What Axles would I end up using??? Hybrid scirocco-passat axles???
>I       would end up using stage 2 or stage 3 axles anyway...but need
to
>know    for sure.
>
>EuroSpeed Ltd. in Toronto makes a bracket that will allow you to
convert
>from the old style Cable Clutch to the newer Hydraulic Clutch.
>
>Does anyone know/have a chart about the gear ratios in the O2A
>Transmissions???
>I would like to pick out a nice a long geared transmission to work
with.
>
>LMK what your thoughts/experiences on this subject are.
>Thanks.
>Adrian C.
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l