Transmission questions ...

[koabi at seeohdee.com (koabi)]

1.-> Mounting brackets/points???

Need different mounts.  Eric S knows of someone who makes them I think
$125/set

2.-> What Axles would I end up using??? Hybrid scirocco-passat axles???
I 	would end up using stage 2 or stage 3 axles anyway...but need to
know 	for sure.

Same axels should work fine if you have 100mm flanges right now.

Here is a site with some good info:
http://www.gironet.nl/home/cillari/gearbox.htm

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Adrian
Sent: Monday, September 22, 2003 2:12 PM
To: scirocco-l@scirocco.org
Subject: Transmission questions ...

Hey Guys...
 I need a bit of help...
I'm getting ready to swap the old motor out with the new one.
Since I heard that O2O Transmissions are quite weak I though I'd swap
O2A in there. Complication wise, is there anything major that I have to
worry about??? 

1.-> Mounting brackets/points???

2.-> What Axles would I end up using??? Hybrid scirocco-passat axles???
I 	would end up using stage 2 or stage 3 axles anyway...but need to
know 	for sure.

EuroSpeed Ltd. in Toronto makes a bracket that will allow you to convert
from the old style Cable Clutch to the newer Hydraulic Clutch.

Does anyone know/have a chart about the gear ratios in the O2A
Transmissions??? 
I would like to pick out a nice a long geared transmission to work with.

LMK what your thoughts/experiences on this subject are.
Thanks.
Adrian C.


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l