[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

measuring cam lobes/intake ports


--- koabi <koabi@seeohdee.com> wrote:
> I will be buying a micrometer.  Where do I measure the camlobes and if
> the cams are stock what measurement should I expect?

Measure heel to tip of lobe, then across heel (base circle).  Subtract that from the heel-to-tip
and that's your lift.


HTH

Ron

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com