Blower problems

[MK1Scirocco16v at comcast.net (Dave Ewing)]

So you have power to the blower?  What about ground?  The fan motors
themselves are pretty tough.  What I mean is that the switch, resistor,
wires, fuse box, etc. usually melt or something before the blower motor
goes.  HTH!

Dave
----- Original Message ----- 
From: "John Lagnese" <jlagnese@massed.net>
To: <scirocco-l@scirocco.org>
Sent: Monday, September 08, 2003 3:51 PM
Subject: Blower problems


> Hi,
> The blower just died in my 87 16V. How do you check these? I reached in
and
> it turned freely. It has power, and the switch appears to be good. If the
> resistor is burned the Bentley says it will work on high. Any other ideas?
> Barring this, how long should I allow to replace the blower?
> Thanks,
> John
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l