adjusting air/fuel mixture

[Indiana_Red at hotmail.com (Ken B)]

DOH!
Sorry about that.  I was excited that I could help for once.  I shal now
diminish and remain Galadria....
Ken


----- Original Message -----
From: "Eric S" <scirocco81@vwmail.net>
To: "Ryan Ruggles" <ryanruggles@uniserve.com>; "Ken B"
<Indiana_Red@hotmail.com>
Cc: <scirocco-l@scirocco.org>
Sent: Friday, September 05, 2003 10:54 AM
Subject: Re: adjusting air/fuel mixture


> Ryan, the link that was provided to you was for CIS-E, you have CIS-Lambda
and cannot check your DPR current, cause you don't have one!!!
>
> Only thing you can really do is check operation of your frequency valve
via a test port, using a Dwell meter (most multimeters do NOT have Dwell
function).  Usually near the rain tray/coil there is a small, 2 prong white
connector with nothing hooked to it...thats your Lambda system test port.
>
> And, changing that screw really only affects your idle mixture.  On CIS,
there is no real way to change overall mixture, except via changing your
fuel pressure (different warm up regulator, unhooking your O2 sensor, etc).
>
> --
> Eric
> www.VintageWatercooleds.com
>
> 79 VW Iltis
> 81 Scirocco S (*TDI* swap and complete restoration in holding pattern)
> 81 Rabbit Truck LX Diesel (FOR SALE!)
> 81 Rabbit Truck 2.0 16v Motronic
> 83 Scirocco Wolfsburg
> 91 Cabriolet (2.0 Crossflow 8v swap and mechanical rebuild in progress)
>
>
> --- "Ryan Ruggles" <ryanruggles@uniserve.com> wrote:
> >I have a cis car so where do I plug in the multimeter.  I can't find a
test
> >port.  It's a 82 rabbit with a 84 GTI JH 1.8L transplant that I did not
do
> >myself.  Any ideas where it could be?
> >
> >Cheers
> >
> >Ryan
> >----- Original Message -----
> >From: "Ken B" <Indiana_Red@hotmail.com>
> >To: "Ryan Ruggles" <ryanruggles@uniserve.com>; <scirocco-l@scirocco.org>
> >Sent: Friday, September 05, 2003 7:17 AM
> >Subject: Re: adjusting air/fuel mixture
> >
> >
> >> http://www.scirocco16v.com/tech/fuel_mixture.htm
> >> Here is a link that I found quite informative.  I even got some
leftover
> >> connectors fom my old MK1 harness and made the little plug/harness
thing.
> >> HTH
> >> Ken
> >>
> >> ----- Original Message -----
> >> From: "Ryan Ruggles" <ryanruggles@uniserve.com>
> >> To: <scirocco-l@scirocco.org>
> >> Sent: Tuesday, September 02, 2003 2:57 PM
> >> Subject: adjusting air/fuel mixture
> >>
> >>
> >> > I was trying to adjust my air/fuel mix with the 3mm allen key today.
I
> >> was
> >> > just wondering why the car wanted to stall every time I pushede down
on
> >> the
> >> > allen key?  Does anybody know why this would happen?  THe engine is a
JH
> >> > w/CIS.
> >> >
> >> > Ryan
> >> >
> >> >
> >> > _______________________________________________
> >> > Scirocco-l mailing list
> >> > Scirocco-l@scirocco.org
> >> > http://neubayern.net/mailman/listinfo/scirocco-l
> >> >
> >>
> >
> >
> >_______________________________________________
> >Scirocco-l mailing list
> >Scirocco-l@scirocco.org
> >http://neubayern.net/mailman/listinfo/scirocco-l
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>