12V ignition wire needed...

[amalventano at sc.rr.com (Allyn)]

in that case, ignition switch, black wire (all black) has 12v on in 'on' and
'start'.
hth
Al

----- Original Message ----- 
From: "Ryan H" <rhock99@epix.net>
To: "Allyn" <amalventano@sc.rr.com>
Cc: <scirocco-l@scirocco.org>
Sent: Saturday, September 06, 2003 9:32 PM
Subject: Re: 12V ignition wire needed...


> > use the coil power supply line.
> > Al
>
> Sorry, guess you missed my follow-up:  I'm trying to use a source inside
the car for two reasons: 1.) the wiring is already there, so I don't have to
run a long wire through the firewall.  2.) In the future I will be using a
MSD coil and ignition, which puts out some crazy voltage from the "+"
terminal, that would fry the unit I'm using (which I will still be using
even with the MSD ignition for features it controls besides ignition
control).
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l