Megasquirt/Haltech pics

[txrocco at sbcglobal.net (Patrick Bureau)]

Alright, I am considering the MS system, but I have a few technical question
and I think I sorted most out and I just wwanted to pass my ideas around to
see if I am understanding this whole new setup I am thinking about doing on
the car makes sense..

1. using MS as I understand it will make possible the removale of the Fuel
Distributor
2. Using ITB's mounted on a Weber Intake Manifold (tracked a manufacturer
that make them so that it can be iTB for an 8v (grin)) , I could match this
setup easily with MS right ?
3. now the ITb setup would make the oem Air intake manifold gone, and leave
me with nothing but MS and ITB's (in my mind I could me missing something
here please feel free to add in ideas/comments)


ATS - Patrick Bureau


->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org
->[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Dan Bubb
->Sent: Wednesday, October 29, 2003 6:09 AM
->To: Ryan H
->Cc: scirocco-l@scirocco.org
->Subject: Re: Megasquirt/Haltech pics
->
->
->I uploaded some more pictures to
->http://scirocco.dhs.org/vw/list/D_Bubb/Haltech_installation/
->showing the fuel line installation and the CAI I fabricated.
->The fuel lines are clamped over the barbs on the existing
->fittings. The CIS delivery and return lines are plastic with a
->rubber covering. So, it's easy to cut them off and clamp a high
->pressure 8mm rubber hose over the barb.
->As for the CAI, despite its very forward location I've never had
->any problem with water ingestion even in a driving rain.
->Dan
->
->----- Original Message -----
->  From: Ryan H
->  To: Dan Bubb
->  Cc: scirocco-l@scirocco.org
->  Sent: Monday, October 27, 2003 9:01 PM
->  Subject: Re: Megasquirt/Haltech pics
->
->
->  Dan,
->  Nice idea on the mounting bracket.  That's exactly where I
->mounted my J&S Safeguard unit, only I didn't make a bracket, I
->used industrial strength velcro.
->  Let everyone know when it's finished, I've got a lot of
->questions about installation I'd like to ask... like for one, how
->do you connect the fuel rail input and output lines to the
->existing fuel lines?
->  Thx!
->
->  >
->  > From: "Dan Bubb" <jdbubb@ix.netcom.com>
->  > Date: 2003/10/27 Mon PM 06:51:34 EST
->  > To: <scirocco-l@scirocco.org>
->  > Subject: Megasquirt/Haltech pics
->  >
->  > For those of you that are interested in installing Megasquirt
->or just curious about electronic fuel injection I posted a couple
->pics of my Haltech installation and some of the parts involved.
->  > Aside from the fact that Haltech has a MASS of wires, there
->really isn't that much difference. (and the MS software is way better.)
->  > It might give you some ideas on how to solve your
->installation project.
->  > Or, it might give you an opportunity to point and laugh!
->  >
->  > Take a look.
->  >
->  > http://scirocco.dhs.org/vw/list/D_Bubb/Haltech_installation/
->  >
->  > Again, thanks to Al for hosting the pics.
->  > Dan
->  > PS. if you're interested in specific details let me know.  I
->may be able to take better pics.
->  >
->  > _______________________________________________
->  > Scirocco-l mailing list
->  > Scirocco-l@scirocco.org
->  > http://neubayern.net/mailman/listinfo/scirocco-l
->  >
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l