Inner CV seperation questions, HELP!!!!!

[rapieper at yahoo.com (Ron Pieper)]

Yeah, what Al said, but don't hit the metal seal on the backside.  It may not go back on easily,
and just looks hacky.  

Repack that joint thoroughly with moly grease - the nasty black stuff.

Ron

--- Allyn <amalventano@sc.rr.com> wrote:
> whack the outer cv housing (cylindrical section between the tranny cup and
> the boot cup) with a hammer. hitting it from the side usually works just
> fine. rotate the shaft as you hit it to alternately hit from side to side.
> hth


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/