non-ac belt

[rhock99 at epix.net (Ryan H)]

If it's a stock bracket modified to fit the alternator, you'll need a 980 mm belt (Gates pn# 7380).  Do yourself a favor and grab a 975 mm as well just in case.  Easily returnable at your local auto store.  If it's a real Euro non-ac bracket, then it's a 945 mm, Gates pn# 7365.

> 
> From: "Derrick flo" <derrickmd18@verizon.net>
> Date: 2003/11/24 Mon PM 10:34:36 EST
> To: <scirocco-l@scirocco.org>
> Subject: non-ac belt
> 
> Ok my alternator went up on my scirocco 16v and I'm getting another alternator.  I have a custom non a/c bracket that I brought a while ago and since I'm replacing my alternator I might as well install the bracket.  the a/c is already out of the car and the alternator is sitting in the stock position with a longer belt.  I wanted to know what belt do I need to move it to the a/c position?  I have a 16v and a 8v pulley already.  doing this tomorrow so I need the info.
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>