[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SCIROCCO.ORG SPEAK UP!! UPDATE
- Subject: SCIROCCO.ORG SPEAK UP!! UPDATE
- From: chris at westcoastpromos.com (Chris D. Edwards)
- Date: Fri Nov 21 10:10:15 2003
An update on the seat clip project.
1) No the seat clip for the front of the seat doesn't fit anything but
Sciroccos from 1976 to 1981 (VW Part # 531 881 203A NO MATTER WHAT
SEATS YOU USE IF YOU HAVE A 76 - 81 SCIROCCO YOU NEED THIS CLIP). Only
those model years used the specific track system in the front.
Sciroccos from 1982 + use a completely different clip (VW Part # 435 881
203A). Hence the reason why VW dropped the part.
2) I had some bad info on how many were required. You only need one
clip per seat, I even verified this on my car. There is no way to put
two clips on.
3) I was looking at reproducing the rear clips also, but I can get them
in bulk quantities for less from VW as the rear clips are used by just
about every VW out there still today.
4) I will still sell all of them as a kit, but wil now consider putting
enough in the kit to do both front seats. That means each kit will
contain 2 front guide clips, 2 rear outter rail clips and 2 inner rail
clips (If you want to see pics of these items let me know and I can send
you one). That being the case a kit to fix both seats will run around
$20 (this is an estimate...The more help I get with this the better I
can make the price.)
I appreciate all the hits I have gotten on this already. Continue to
aske questions if you have them and please continue to spread the info
around and let me know how many you could use. If I can't break even on
the mold charge of $1000 I can't do this. This is a major discounted
price on the mold too. It should be costing me $2000 - $3000. I will
have plastic/nylon costs on top of this. If we can come up with a
minimum of 100 kits needed I can get this started. I would assume there
are at least 100 Mark 1 Scirocco's on the list!?
Thanks again for all the support with this project and hopefully over
time Kristen and some of the other people working on reproducing Mark 1
Scirocco parts will all be able to unite our efforts and get most
everything we need for our cars that we can't get anymore!!
Chris Edwards
81 Scirocco JH
81 Scirocco 16V