Idle problems......standard for a rocco

[ansonivan at yahoo.com (Anson Clement)]

Make sure your throttle plate is closing all the way, I've had a throttle cable go bad and cause the throttle to jam partly open. After that it's time to break out a can of carb cleaner and start spraying for vacume leaks.... just have a fire extinguisher handy in case of combustion.
 
Anson

Scourge <scourge@cogeco.ca> wrote:
Ok, so my car is officially a rocco now, lol.
Idle has been "hunting" for a while now, between 900 and 1200 rpm. Last night, car was idling and hunting as usual then vroom, 2k, steady....a little odd. Drive home, still idle's at 2k. Got up this morning went out started the car and it started better then normal, but idle was at 1500. Drive around for a few and it's back up to 2k, little while later, back to 1k.
Car sat for a little over an hour and when I started it back up the idle was at 1800. On the way home every time I stopped the idle was a bit higher. 3k by the time I got home. 
I figured idle screw worked it's way loose.....nope. Vacuum leak....not that I can find. Cleaned the idle screw put it in ALL the way and the car idles at 1400.
wtf?
I'm thinking cold start injector. But will that raise the rpm soo much??
Help!! lol


Thanx
-George
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l

---------------------------------
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard