rear wiper motor and front washer wiring gremlins

[ryanruggles at uniserve.com (Ryan Ruggles)]

Thanks or all of the input.  The rear wiper was wired incorrectly.  the p.o. is a dumb ass.......  As for the front washer pump, I had to clean and bend the contacts in.  Now it works perfectly every time.  Thanks for the input.

Cheers

R.
----- Original Message ----- 
From: "John Lagnese" <jlagnese@massed.net>
To: "Ryan Ruggles" <ryanruggles@uniserve.com>; <scirocco-l@scirocco.org>
Sent: Friday, May 23, 2003 3:00 PM
Subject: Re: rear wiper motor and front washer wiring gremlins


> 1) I'd pull the wire off the pump and see if it still blows the fuse first!
> 2) Clean the pump connections and then pull the wheel and clean those
> contacts.
> ----- Original Message -----
> From: "Ryan Ruggles" <ryanruggles@uniserve.com>
> To: <scirocco-l@scirocco.org>
> Sent: Friday, May 23, 2003 1:38 PM
> Subject: rear wiper motor and front washer wiring gremlins
> 
> 
> > 1)    I have been trying to get my rear wiper to work but every time I put
> a
> > fuse in it pops when I turn on hte ignition, and pretty violently too.
> > SHould I just run new wires to it or is this a pretty common problem with
> an
> > "easy fix"?
> >
> >
> > 2)    Also I have been trying to get my front window washing pump to work.
> > It only works once every like 20 times or so.  It seems to be getting
> power
> > but maybe weaker than 12v.  I know the pump works because it was working
> in
> > the rear.
> >
> > Cheers
> >
> > R.
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
>