[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
OT: audi brakes & bleeding
- Subject: OT: audi brakes & bleeding
- From: brianm at earendel.org (Brian McGarvey)
- Date: Sat May 10 22:00:09 2003
So..
the saga continues and is completed for this stage.
To bleed audi brakes you HAVE to use a pressure bleed system.
Here's how i did it.
#0 pump -- hold -- bleed (repeat) -- no joy
#1 tried the head pressure in the iinsectecide sparyer.. no joy leaked
alot and didnt really push the fluid.
#2
"acquired" a master clyn cap.. any VW audi will work just about.
bought bike inner tube
bought bike frame pump.
trimmed a round circle slightly larger than the inner dia of the cap
broke sensor mouning out of the cap.
inserted the valve portion thru the hole.
pumped it up.
blead each valve (6 ea on a audi)
checked it..
brakes work good. ABS even functioning mostly...
--
-------------------------------------------------------------
Brian
88 16v $2003 GRM challenge car http://www.grmotorsports.com
84 0v Next years car got parts?
82 2.0L Topless bunny -- Knock Ignition and bigger clutch. next.
90 90q20v doing daily driver duty.
91 VFR750F everybody needs a 11-12 sec vehicle.
Contact method. Email me for AIM, ICQ, YahooIM, IRC, etc.
-------------------------------------------------------------