[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[tech][16v] OXS help
Thanks, that's exactly the info I needed...
Chris M.
----- Original Message -----
From: "Rick Alexander" <ralexander03@snet.net>
To: "The list" <scirocco-l@scirocco.org>
Sent: Saturday, May 10, 2003 9:38 PM
Subject: Re: [tech][16v] OXS help
> There are "test" connections in this area that do not connect to anything.
> The O2 sensor has a two place plug and a single spade connector. The
single
> is the sensor output and goes into a shielded probably green wire. The
other
> connector is the heater and should only plug into one of the remaining
> connections.
>
> Rick Alexander
>
> ----- Original Message -----
> From: "Chris M" <ctmscirocco@hotmail.com>
> To: <scirocco-l@scirocco.org>
> Sent: Saturday, May 10, 2003 9:10 PM
> Subject: [tech][16v] OXS help
>
>
> > Hi all,
> > I'm retrofitting a Haltech F9a to my 16v right now and I need to hook
up
> > an A/F meter to the O2 sensor. I'm looking at what I assume is the O2
> > connector and it doesn't correspond to my bentley. The plug I found is
> > right behind the throttle body and has a 2 place male connector with 2
> white
> > wires, and a black wire hooked to a female spade plug, all in the same
> loom.
> > Does any of this ring a bell with anybody? I took about a thousand
> pictures
> > of this thing while I was taking it apart, but of course, I have none of
> > this connector. Any help would be really appreciated.
> >
> > TIA!
> >
> > Chris M.
> > 82 8v Scirocco (RIP)
> > 88 16v Scirocco
> > 70 MGB (wife's car)
> > 76 Chevy Laguna
> > http://www.geocities.com/vw16vmp3scirocco/
> > ctmetzger@hotmail.com
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>