[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
ABA Distributor
I'm using a Audi Distributor with electronic advance. When I did my
swap, looking back, I could have gotten a distributor from a A2
Golf/jetta because I had an adapter kit from TT to make it fit in the
ABA block. I was wondering if anyone had used the A2 8v one for their
knock sensor set-up.
Dan Bubb wrote:
>
> I'm not sure I understand....
> I would assume the Golf distributor had no internal advance and had a Hall
> sender. So, if you're using a KS ignition that is what you would want. And
> it could be made to fit in the ABA with the gear and adapter as you
> describe.
> So, what are you using for a distributor and ignition now?
> Dan
>
> ----- Original Message -----
> From: "Kervin" <kervinridgley@earthlink.net>
> To: "List" <scirocco-l@scirocco.org>
> Sent: Sunday, June 22, 2003 10:11 PM
> Subject: ABA Distributor
>
> > I was setting the timing on my Golf today and I think I found something
> > that would have made the engine swap in my Scirocco cheaper. The Golf
> > uses Digifant II and the distributor is linked to the knock sensor
> > contorl box. I think I could have used that distributor with the TT
> > adaptor and gear on my ABA. Has anyone done that?
> > --
> > Kervin
> > 86 Scirocco 2.0 8v 4K+80% and lots of other numbers and letters
> > 90 Golf GL ac, sunroof, cruise control my D-lux ride
> > 00 tt600
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
--
Kervin
86 Scirocco 2.0 8v 4K+80% and lots of other numbers and letters
90 Golf GL ac, sunroof, cruise control my D-lux ride
00 tt600