Brake Conversion Info Request

[marc_scirocco at sympatico.ca (Marc Scirocco Quebec)]

Bearings and dust shield? Where does that come from?

They only need to be replaced if needed. Nothing to do with the 10 inches
brake conversion.

Cheers.

Marc
'83 Scirocco
'88 Scirocco Slegato

> -----Message d'origine-----
> De : scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org]De la part de ATS - Patrick
> Bureau
> Envoye : 18 juin, 2003 08:43
> A : Scott WIGGINS; scirocco-l@scirocco.org
> Objet : RE: Brake Conversion Info Request
>
>
> Basically you need calipers, carriers, rotors, bearings, and
> dust sheild.
>
> tech notes:
> <http://www.longcoeur.com/scirocco/Technotes/16vfrontbrakes/in
> dex.html>
>
>
> ATS - Patrick Bureau - txrocco@sbcglobal.net
> Http://www.longcoeur.com/scirocco/
> ============================================
> '85 2.0L Prowler Orange Kamei X1 Rocco
> '85 1.8L Titian Red Rocco (daily driver)
> '98 4.0L Jeep Cherokee
> '91 7.3L F250 diesel Super cab,8 Ft box.
>
>
>
> =>-----Original Message-----
> =>From: scirocco-l-bounces@scirocco.org
> =>[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Scott WIGGINS
> =>Sent: Tuesday, June 17, 2003 9:58 PM
> =>To: scirocco-l@scirocco.org
> =>Subject: Brake Conversion Info Request
> =>
> =>
> =>I would like to convert the brakes in my 1981 Mk1 to those from a
> =>Scirocco 16V.  Is anything required other than the rotors and
> =>calipers such as those listed in the vortex listing below?  I
> =>would appreciate any input.
> =>
> =>http://forums.vwvortex.com/zerothread?id=879609
> =>_______________________________________________
> =>Scirocco-l mailing list
> =>Scirocco-l@scirocco.org
> =>http://neubayern.net/mailman/listinfo/scirocco-l
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>