even more questions

[jdbubb at ix.netcom.com (Dan Bubb)]

ETKA lists the following parts as being different between 4 and 5 speed:
Relay lever- the lever with the large plastic ball
Selector lever-the vertical part on the front of the long fore and aft shift
rod that has the square opening for the large plastic ball.
cover plate-the large sheet metal weldment that mounts the shift lever to
the center tunnel of the chassis.
Selector rods-both the rods with the plastic sockets on both ends.

No clue what the specific differences may be.
HTH
Dan


----- Original Message -----
From: "Tom C" <tomc@satx.rr.com>
To: "Texas Scirocco Team" <TST@yahoogroups.com>; "Scirocco List"
<scirocco-l@scirocco.org>
Sent: Monday, June 16, 2003 9:35 AM
Subject: even more questions


> Hi all again,
>
> Got the 9a installed yesterday, just wondering if there are any changes in
> the linkage when going from a 4sp to a 5sp. I still have some adjusting
work
> to do, though I rowed through the gears with the trans dry and couldn't
find
> 5th.
>
> Thanks for all the help I've been getting it has been mucho appreciated,
>
> Tom C
> '79 "The Project" Scirocco
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l