[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
adjusting Ignition timing
- Subject: adjusting Ignition timing
- From: juliemac57 at hotmail.com (Julie Macfarlane)
- Date: Sat Jul 26 15:56:10 2003
I cannot find the mark on the fly wheel for some reason.
I didn't assemble the system. I just fixed it.. (with ome help)
Julie Macfarlane
Menlo Park Research & Development
Internet Application Developer
www.menloparkrandd.com
www.montgomeryweb.org
Amsterdam NY
>From: Ryan H <rhock99@epix.net>
>To: "Julie Macfarlane" <juliemac57@hotmail.com>
>CC: scirocco-l@scirocco.org
>Subject: Re: adjusting Ignition timing
>Date: Sat, 26 Jul 2003 0:23:24 -0400
>
> > I have q's too...
> > The mark on the top cam (timing belt) was set so that when the timing
>light
> > went off, it was about 1 tooth towards the back of the car. Supposedly 6
>deg
> > off.
>
>Not really sure what you mean, but i'll try to answer anyway: I wouldn't
>go by the cam sprocket gear. I put new cams in, and when the cams are at
>TDC, the sprocket mark is back by a few degrees as you are saying. And
>each tooth is 9 degrees, so you'd probably notice if if was off by that
>much.
>
>
> > The dist is set almost at the end of the adjustment range (where the
>10mm
> > bolt goes through)
> > Is this correct?
>
>Really, you can't go by the position of the distributor, although the end
>of the adjustment range doesn't seem right...
>Best bet, Julie, is to go by the flywheel timing mark. At idle (and warm),
>the light should go on as the big V mark on the flywheel passes by,
>indicating 6 degrees advance.
>
> >
> >
> >
> > Julie Macfarlane
> > Menlo Park Research & Development
> > Internet Application Developer
> > www.menloparkrandd.com
> > www.montgomeryweb.org
> > Amsterdam NY
> >
> >
> >
> >
> >
> > >From: derrickmd18@juno.com
> > >To: scirocco-l@scirocco.org
> > >Subject: adjusting Ignition timing
> > >Date: Fri, 25 Jul 2003 19:34:16 -0700
> > >
> > >How would I go about adjusting the ignition timing on my 16v scirocco
> > >with a 1.8 motor? I'm getting a timing light and I wanted to know
>where
> > >I hook it up and adjust? how do I know what degree to set it to and
>how
> > >to set it? whats the stock settings?
> > >
> > >_______________________________________________
> > >Scirocco-l mailing list
> > >Scirocco-l@scirocco.org
> > >http://neubayern.net/mailman/listinfo/scirocco-l
> >
> > _________________________________________________________________
> > The new MSN 8: smart spam protection and 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail