exhaust options

[txrocco at sbcglobal.net (ATS - Patrick Bureau)]

if you go the way of the header, want to sell your 4-2-1 exhaust

to remove exhaust manifold, spray PB blaster for 3-5 days on the bolts
before working on it... they will come right out...

ATS - Patrick Bureau - txrocco@sbcglobal.net
----------------------------------------------
MSN:ATSGTX@hotmail.com |YAHOO:ATSGTX@yahoo.com
ICQ:32918816           |AIM:Texasscirocco
----------------------------------------------


=>-----Original Message-----
=>From: scirocco-l-bounces@scirocco.org
=>[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Ryan Ruggles
=>Sent: Thursday, July 24, 2003 12:46 PM
=>To: scirocco-l@scirocco.org
=>Subject: exhaust options
=>
=>
=>I am putting a new exhaust on my rabbit Gti with a 1.8l JH with a weber
=>redline throttle body.  Here are my options:
=>
=>1)  Use my current 4 to 2 manifold and downpipe and just adapt it
=>to 2" from
=>the flex pipe back w/ no cat (82)
=>
=>2) I can get a header from a wrecker for $10-20 and then make a 2" exhaust
=>ofter the header, but then I have to remove the manifold that has
=>been there
=>since the beginning of time and then find a gasket for the header
=>of which I
=>don't know the make.
=>
=>3) Also I need options for the best mufflers.  I have a 2 &1/4" thresh
=>mufffler I could use but it is for my toyota 4x4 so I'd rather
=>not.  So what
=>kind of mufflers fit/perform for this set up.
=>
=>
=>Which is better to go for, the manifold setup or the unknown header?
=>
=>Peace
=>
=>Ryan
=>
=>PS: looking at buying my second 16V Roc :)
=>
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l