(tech) More odometer questions...

[losinit at usa.net (Cathy Boyko)]

Well, for whatever reason I finally decided to around get to fixing my
odometer. So I have it on my kitchen table, with a companion guinea pig
cluster, and am following Foxx in the Box'as tech notes. So I'm at "use the
small screwdriver to gently pry up the gold speedometer spring" step. but it
doesn't move. 

So some questions, and I'd reallly like to get the car fixed for the WF trip
Friday morning.

SO:
1. Where do I pry the speedo needle, I'm assuming you apply pressure from
below ( with the screwdriver resting on the plastic housing , and pry up on
the brass ring that holds the spring to the speedo shaft, is that right? The
plastic just flexes, and the ring doesn't budge. On either of the clusters.
:(

2. I don't see any cracks in the gears, but the drive gear shaft slides
laterally through the barrels of the numbers, is there supposed to be anything
to resist this movement? 

3. I'm assuming I need that spring assembly off to lift the odometer free of
the cluster, and this will reveal the gear that is the problem. Is there
anything else?


Thanks, I await your wisdom.

cathy (hey, at least I got this far on my own!)