A little taste of what I'm cookin

[bennyb2k4 at sympatico.ca (Ben Beacock)]

Megasquirt, which costs about $120US.  I use a 16V knock box for
ignition and both plug into a Digifant-II harness with an adapter I
made.

Ben
81 Scirocco 2L16V EFI

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Dan Bubb
Sent: July 10, 2003 1:33 PM
To: bbeacock@rogers.com; Scirocco. org Mailing List
Subject: Re: A little taste of what I'm cookin

And the ECU to drive the injectors with this hot ITB setup would be?????
Dan


----- Original Message ----- 
From: "Ben Beacock" <bennyb2k4@sympatico.ca>
To: "Scirocco. org Mailing List" <scirocco-l@scirocco.org>
Sent: Thursday, July 10, 2003 12:21 PM
Subject: RE: A little taste of what I'm cookin


> I can get 2 dual input K&Ns that have the exact spacing and connector
> diameter.  Eventually, I'd like to make an airbox with a panel filter
> for better flow and to get air from a cooler spot. Since I have a
large
> 16V rad, the air isn't very cool at that point.    
> 
> As for pricing, I got the TBs for free from the Formula SAE project
I'm
> managing (since we can only have 1 TB by the rules).  I checked out
ebay
> and found them there for about $150US.
> 
> There are also provisions for running staged injectors, since the TBs
> have the mounts for the stock injectors built in(but not normal bosch
> style).
> 
> Ben
> 81 Scirocco 2L16V EFI
> 
> 
> 
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Dan Bubb
> Sent: July 10, 2003 9:58 AM
> To: bbeacock@rogers.com; Scirocco. org Mailing List
> Subject: Re: A little taste of what I'm cookin
> 
> Looks like a really cool inexpensive way to do ITB's!
> Any plans for trumpets and air filters?
> just curious.
> Dan
> 
> ----- Original Message ----- 
> From: "Ben Beacock" <bennyb2k4@sympatico.ca>
> To: "Scirocco. org Mailing List" <scirocco-l@scirocco.org>
> Sent: Thursday, July 10, 2003 8:54 AM
> Subject: RE: A little taste of what I'm cookin
> 
> 
> > I just finished re-spacing the throttle bodies.  They were
originally
> > 80mm apart and need to be 88mm.  Next step is to fill a bit of the
> lower
> > manifold with weld to make a smooth transition then weld on the
> flanges.
> > The throttle bodies conveniently come with a rubber mount that
> > transitions from a circle to an oval shape like the lower manifold
but
> > its slightly smaller.
> > 
> > Ben
> > 81 Scirocco 2L16V EFI
> > 
> > -----Original Message-----
> > From: scirocco-l-bounces@scirocco.org
> > [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of koabi
> > Sent: July 8, 2003 11:43 AM
> > To: bbeacock@rogers.com; 'Scirocco. org Mailing List'
> > Subject: RE: A little taste of what I'm cookin
> > 
> > Can I have a bite?
> > 
> > What's left to work out with that setup?
> > 
> > koabi
> > 
> > -----Original Message-----
> > From: scirocco-l-bounces@scirocco.org
> > [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Ben Beacock
> > Sent: Tuesday, July 08, 2003 7:29 AM
> > To: Scirocco. org Mailing List
> > Subject: A little taste of what I'm cookin
> > 
> >
>
http://www.vwot.org/community/modules/Gallery/albums/albuo65/0020_G.jpg
> > 
> > I'm hoping to have these done for Waterfest.  If it works as
planned,
> I
> > might be able to make them for significantly less than TWM or Badger
> 5.
> > 
> > Ben
> > 81 Scirocco 2L16V EFI (soon ITB!)
> > 
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> > 
> > 
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> > 
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l