A little taste of what I'm cookin

[bennyb2k4 at sympatico.ca (Ben Beacock)]

I can get 2 dual input K&Ns that have the exact spacing and connector
diameter.  Eventually, I'd like to make an airbox with a panel filter
for better flow and to get air from a cooler spot. Since I have a large
16V rad, the air isn't very cool at that point.    

As for pricing, I got the TBs for free from the Formula SAE project I'm
managing (since we can only have 1 TB by the rules).  I checked out ebay
and found them there for about $150US.

There are also provisions for running staged injectors, since the TBs
have the mounts for the stock injectors built in(but not normal bosch
style).

Ben
81 Scirocco 2L16V EFI



-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Dan Bubb
Sent: July 10, 2003 9:58 AM
To: bbeacock@rogers.com; Scirocco. org Mailing List
Subject: Re: A little taste of what I'm cookin

Looks like a really cool inexpensive way to do ITB's!
Any plans for trumpets and air filters?
just curious.
Dan

----- Original Message ----- 
From: "Ben Beacock" <bennyb2k4@sympatico.ca>
To: "Scirocco. org Mailing List" <scirocco-l@scirocco.org>
Sent: Thursday, July 10, 2003 8:54 AM
Subject: RE: A little taste of what I'm cookin


> I just finished re-spacing the throttle bodies.  They were originally
> 80mm apart and need to be 88mm.  Next step is to fill a bit of the
lower
> manifold with weld to make a smooth transition then weld on the
flanges.
> The throttle bodies conveniently come with a rubber mount that
> transitions from a circle to an oval shape like the lower manifold but
> its slightly smaller.
> 
> Ben
> 81 Scirocco 2L16V EFI
> 
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of koabi
> Sent: July 8, 2003 11:43 AM
> To: bbeacock@rogers.com; 'Scirocco. org Mailing List'
> Subject: RE: A little taste of what I'm cookin
> 
> Can I have a bite?
> 
> What's left to work out with that setup?
> 
> koabi
> 
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Ben Beacock
> Sent: Tuesday, July 08, 2003 7:29 AM
> To: Scirocco. org Mailing List
> Subject: A little taste of what I'm cookin
> 
>
http://www.vwot.org/community/modules/Gallery/albums/albuo65/0020_G.jpg
> 
> I'm hoping to have these done for Waterfest.  If it works as planned,
I
> might be able to make them for significantly less than TWM or Badger
5.
> 
> Ben
> 81 Scirocco 2L16V EFI (soon ITB!)
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l