DANG!!!!

[joshhignight at techography.net (joshhignight@techography.net)]

Not likely, look closely. Way too small, no teeth on the pulley. Engine runs on a dizzy-less programmable system and has an external oil pump. Shaft is probably totally removed from the block as it looks like that pulley is mounted to a bracket which is mounted to the engine. Less parasitic loss due to the absence of the internal int. shaft bearings and the weight of the shaft itself. Just a simple pulley w/ bearings to take up some slack on the timing belt. 


Joshua



Original Message -----------------------
Intermediate shaft pulley is there to drive the intermediate shaft.....

Larry
  ----- Original Message ----- 
  From: joshhignight@techography.net 
  To: Scirocco List 
  Sent: Sunday, July 06, 2003 7:33 PM
  Subject: RE: Re: DANG!!!!


  Notice the int. shaft pulley is just a bank wheel, not the big gear. Probably just there to take up slack in the timing belt. 

  Neat-o engine!


  _______________________________________________
  Scirocco-l mailing list
  Scirocco-l@scirocco.org
  http://neubayern.net/mailman/listinfo/scirocco-l

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l