[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
New to list: Kinda Long
This is a multi-part message in MIME format.
------=_NextPart_000_00C2_01C2C642.C266E6A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Can you still get original colors? I have Colibri Green, was just gonna =
match it as best I could with powder coat colors. I have a friend that's =
done powder coating for a while, and is real good at it, to help match =
the color.
Oh, and what parts would I need for a rebuild? Just o-rings and boots? =
Jeff=20
----- Original Message -----=20
From: L F=20
To: Jeff Southerland=20
Sent: Monday, January 27, 2003 5:58 PM
Subject: Re: New to list: Kinda Long
Yes, you'd need to completely tear down the caliper to have it Powder =
coated. ordinary paint works just fine.
It is holding up perfectly on mine after 14 months...
Larry
----- Original Message -----=20
From: Jeff Southerland=20
To: scirocco-l@scirocco.org=20
Sent: Saturday, January 25, 2003 10:52 AM
Subject: Re: New to list: Kinda Long
Thanks for all the responses, and no new info on the seat situation.
I was thinking of powder coating the calipers, but as I understand =
you would
need to rebuild the calipers afterwards. I have never rebuilt =
calipers, and
don't know about kits and part sources. It wouldn't hurt to build =
them
anyway, for longevity. I did see some nifty stuff here for the =
rotors, and
they also have caliper paints.
=
http://64.4.16.250/cgi-bin/linkrd?_lang=3DEN&lah=3Da019d4ca976975f543eba5=
e5d0c45
=
cbc&lat=3D1043519238&hm___action=3Dhttp%3a%2f%2femail%2eeastwoodco%2ecom%=
2fUM%2f
T%2eASP%3fA5%2e16%2e15%2e4%2e194598
I didn't want to rattle can the calipers, as I plan on keeping this =
car for
a very long time. And the FLAPS rattle cans say "for best results =
heat to
400* for x hours".
The squareness issue is just that, ABA vs 3A. I want to build a =
motor, and
was wondering about weight between the two blocks, as weight and F/R =
balance
is a major issue for me, and what real world differences do the =
stroke vs
bore issues make. I will be building from scratch, so everything is =
a
consideration, and ideas are welcome.
A new issue is exhaust size, I want to upgrade the current stock =
size,1.6
engine, but don't want to lose too much bottom end. I also want to =
be
prepared for the upcoming larger engine size. I thought about 2.25 =
with a
more restrictive muffler, for the 1.6. Later with the new engine, =
install
new muffler, then only eating the muffler cost and not two exhausts.
I have looked for this tranny code, with no luck, anyone enlighten =
me? "FO
20029"
Thanks for the time Jeff
----- Original Message -----
From: "T Berk" <tberk@mindspring.com>
To: "Jeff Southerland" <jsoutherland16@attbi.com>
Cc: <scirocco-l@scirocco.org>
Sent: Friday, January 24, 2003 5:07 PM
Subject: Re: New to list: Kinda Long
> > Jeff Southerland wrote:
> >
> > My name is Jeff, and I am kinda new to the list. I joined about =
six
> > weeks ago and have been mostly just reading. I just wanted to =
say
> > hello and have a few questions. Please forgive me if they have =
been
> > answered before. I have a '79 and have begun the resto/update =
and
> > need some info.
> >
> > 1) I found some green plaid seats and need to know if any were =
made
> > that were height adjustable. The price for the complete set is =
$250
> > USD, is that fair? I have not seen these yet, just need to know =
if
> > they are worth the time, or not.
> >
>
> If they aren't out of a Rocc I don't think they are height =
adjustable.
> That said some folks have swapped the lower portion of the =
adjustable
> seats over to the good portions of the 'newer' seats.
>
>
> > 2) I want to paint my brake components and would like some pros =
and
> > cons. Any experiences would be appreciated.
> >
>
> Like the others mentioned you can get hi-temp caliper paint from =
your
> FLAPS.
> I like the quiet colors like black myself.
>
> > 3) I was wondering if anyone has any experiences with the
> > "squareness" of an engine-- longer stoke vs bigger bore.
>
> Classic case is the tall block 2.0 8v vs the Audi 3A bubble block. =
The
> former is a longer stroking motor than the latter. What about it?
>
> > I'll stop here for now, cause this is getting a little long.
> > Thanks again for any and all help. Jeff
>
>
> Aint too long yet. Keep typing.
>
> TBerk
> Oh, & Welcome.
>
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l
------=_NextPart_000_00C2_01C2C642.C266E6A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1126" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Can you still get original colors? I =
have Colibri=20
Green, was just gonna match it as best I could with powder coat colors. =
I have a=20
friend that's done powder coating for a while, and is real good at it, =
to help=20
match the color.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> Oh, and what parts would I need =
for a=20
rebuild? Just o-rings and boots? Jeff </FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Drocco16v@netzero.net href=3D"mailto:rocco16v@netzero.net";>L =
F</A>=20
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Djsoutherland16@attbi.com=20
href=3D"mailto:jsoutherland16@attbi.com";>Jeff Southerland</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, January 27, 2003 =
5:58=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: New to list: Kinda =
Long</DIV>
<DIV><BR></DIV>
<DIV><FONT face=3DArial size=3D2>Yes, you'd need to completely tear =
down the=20
caliper to have it Powder coated. ordinary paint works just=20
fine.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>It is holding up perfectly on mine =
after 14=20
months...</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Larry</FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Djsoutherland16@attbi.com=20
href=3D"mailto:jsoutherland16@attbi.com";>Jeff Southerland</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dscirocco-l@scirocco.org=20
href=3D"mailto:scirocco-l@scirocco.org";>scirocco-l@scirocco.org</A> =
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Saturday, January 25, =
2003 10:52=20
AM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: New to list: =
Kinda=20
Long</DIV>
<DIV><BR></DIV>Thanks for all the responses, and no new info on the =
seat=20
situation.<BR><BR>I was thinking of powder coating the calipers, but =
as I=20
understand you would<BR>need to rebuild the calipers afterwards. I =
have=20
never rebuilt calipers, and<BR>don't know about kits and part =
sources. It=20
wouldn't hurt to build them<BR>anyway, for longevity. I did see some =
nifty=20
stuff here for the rotors, and<BR>they also have caliper =
paints.<BR><A=20
=
href=3D"http://64.4.16.250/cgi-bin/linkrd?_lang=3DEN&lah=3Da019d4ca97=
6975f543eba5e5d0c45">http://64.4.16.250/cgi-bin/linkrd?_lang=3DEN&lah=
=3Da019d4ca976975f543eba5e5d0c45</A><BR>cbc&lat=3D1043519238&hm__=
_action=3Dhttp%3a%2f%2femail%2eeastwoodco%2ecom%2fUM%2f<BR>T%2eASP%3fA5%2=
e16%2e15%2e4%2e194598<BR>I=20
didn't want to rattle can the calipers, as I plan on keeping this =
car=20
for<BR>a very long time. And the FLAPS rattle cans say "for best =
results=20
heat to<BR>400* for x hours".<BR><BR>The squareness issue is just =
that, ABA=20
vs 3A. I want to build a motor, and<BR>was wondering about weight =
between=20
the two blocks, as weight and F/R balance<BR>is a major issue for =
me, and=20
what real world differences do the stroke vs<BR>bore issues make. I =
will be=20
building from scratch, so everything is a<BR>consideration, and =
ideas are=20
welcome.<BR><BR>A new issue is exhaust size, I want to upgrade the =
current=20
stock size,1.6<BR>engine, but don't want to lose too much bottom =
end. I also=20
want to be<BR>prepared for the upcoming larger engine size. I =
thought about=20
2.25 with a<BR>more restrictive muffler, for the 1.6. Later with the =
new=20
engine, install<BR>new muffler, then only eating the muffler cost =
and not=20
two exhausts.<BR><BR> I have looked for this tranny code, with =
no luck,=20
anyone enlighten me? "FO<BR>20029"<BR><BR>Thanks for the=20
time Jeff<BR><BR><BR><BR><BR><BR><BR><BR><BR>----- =
Original=20
Message -----<BR>From: "T Berk" <<A=20
=
href=3D"mailto:tberk@mindspring.com";>tberk@mindspring.com</A>><BR>To: =
"Jeff=20
Southerland" <<A=20
=
href=3D"mailto:jsoutherland16@attbi.com";>jsoutherland16@attbi.com</A>>=
<BR>Cc:=20
<<A=20
=
href=3D"mailto:scirocco-l@scirocco.org";>scirocco-l@scirocco.org</A>><B=
R>Sent:=20
Friday, January 24, 2003 5:07 PM<BR>Subject: Re: New to list: Kinda=20
Long<BR><BR><BR>> > Jeff Southerland wrote:<BR>> =
><BR>> >=20
My name is Jeff, and I am kinda new to the list. I joined about =
six<BR>>=20
> weeks ago and have been mostly just reading. I just wanted to=20
say<BR>> > hello and have a few questions. Please forgive me =
if they=20
have been<BR>> > answered before. I have a '79 and have begun =
the=20
resto/update and<BR>> > need some info.<BR>> ><BR>> =
> 1) I=20
found some green plaid seats and need to know if any were =
made<BR>> >=20
that were height adjustable. The price for the complete set is =
$250<BR>>=20
> USD, is that fair? I have not seen these yet, just need to know =
if<BR>> > they are worth the time, or not.<BR>>=20
><BR>><BR>> If they aren't out of a Rocc I don't think they =
are=20
height adjustable.<BR>> That said some folks have swapped the =
lower=20
portion of the adjustable<BR>> seats over to the good portions of =
the=20
'newer' seats.<BR>><BR>><BR>> > 2) I want to paint my =
brake=20
components and would like some pros and<BR>> > cons. Any =
experiences=20
would be appreciated.<BR>> ><BR>><BR>> Like the others =
mentioned=20
you can get hi-temp caliper paint from your<BR>> FLAPS.<BR>> I =
like=20
the quiet colors like black myself.<BR>><BR>> > 3) I was =
wondering=20
if anyone has any experiences with the<BR>> > "squareness" of =
an=20
engine-- longer stoke vs bigger bore.<BR>><BR>> Classic case =
is the=20
tall block 2.0 8v vs the Audi 3A bubble block. The<BR>> former is =
a=20
longer stroking motor than the latter. What about =
it?<BR>><BR>> >=20
I'll stop here for now, cause this is getting a little long.<BR>> =
>=20
Thanks again for any and all help. Jeff<BR>><BR>><BR>> Aint =
too=20
long yet. Keep typing.<BR>><BR>> TBerk<BR>> Oh, &=20
=
Welcome.<BR>><BR><BR><BR><BR>_________________________________________=
______<BR>Scirocco-l=20
mailing list<BR><A=20
=
href=3D"mailto:Scirocco-l@scirocco.org";>Scirocco-l@scirocco.org</A><BR><A=
=20
=
href=3D"http://neubayern.net/mailman/listinfo/scirocco-l";>http://neubayer=
n.net/mailman/listinfo/scirocco-l</A><BR></BLOCKQUOTE></BLOCKQUOTE></BODY=
></HTML>
------=_NextPart_000_00C2_01C2C642.C266E6A0--