Front wheel bearing tool

[nealtovsen@yahoo.com (Neal Tovsen)]

I don't even use the back plate anyway. I use the
knuckle itself as the leverage point for these bolts.
Just rotate the hub slightly to align the bolts with
an appropriate solid area of the knuckle to push
against.

If you have the brake splash guards, it will dimple
them a little bit. Or, you can use any flat metal as a
buffer between the bolt and the splash guards.

Neal

> It works, but it doesn't come with the special back
> plate, that you need to separate the hub from the
> carrier.
> The Schley uses 2 bolts that thread through the hub
> and work against the back plate, and this pushes the
> hub off of the hub carrier.
> 
> I had a duplicate plate made out of 1/2" stainless,
> and if anyone wants the original Schley back plate,
> I'll sell it for $10 plus shipping.
> 
> Peter thescirocco.com


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com