[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[16v] Converting to solid lifters?

Subject: [16v] Converting to solid lifters?
From: aculda@cogeco.ca (Adrian C.)
Date: Sun, 19 Jan 2003 20:02:15 -0500
References: <tmvsiuu5pllnngt.190120031334@hermes>

Two words ...
Drake or Ottienger 
----- Original Message ----- 
From: <joshhignight@techography.net>
To: "Scirocco List" <scirocco-l@scirocco.org>
Sent: Sunday, January 19, 2003 1:34 PM
Subject: [16v] Converting to solid lifters?


> Will the lifters that go in an old solid lifter 8v fit in a 16v head? 
> 
> Thanks,
> Joshua
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l

References:
- [16v] Converting to solid lifters?
  - From: joshhignight@techography.net (joshhignight@techography.net)

Prev by Date: Looked at an 81S today - need lots of input (long)
Next by Date: how hard is it to replace the ignition switch?
Previous by thread: [16v] Converting to solid lifters?
Next by thread: [16v] Converting to solid lifters?
Index(es):
- Date
- Thread