JE Pistons & block assembly

[jp43044@netzero.net (Erik Patterson)]

This should be what you need:

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=85487&prmenbr=
361



----- Original Message -----
From: "Anthony Pelletier" <vwnuts@yahoo.com>
To: <scirocco-l@scirocco.org>
Sent: Monday, February 17, 2003 3:27 PM
Subject: JE Pistons & block assembly


> I recently bought some JE's for a forced induction 2.0
> & am getting ready to send the block out.  When
> reading the instructions the rings are "file fit"
> meaning you have to file them down to the correct
> spec.  It says to do this using a "ring file"  Does
> anyone out there know if a "ring file" is any
> different than a regular file?  Also, Has anyone out
> there installed JE's themselves.  I will have a
> machine shop do the bore/hone/cleaning/rod resizing,
> but I would like to assemble it myself and want to
> make sure its as straigt foward as I think it is.  I
> mean I should be all set as long as I use assembly
> lube and position the rings properly right?  Any info
> is appreciated.
>
> Thanks,
> Tony
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Shopping - Send Flowers for Valentine's Day
> http://shopping.yahoo.com
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>