[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

need part #

Hey old 16v dudes... listen up (oh I do love mornings like theses)

Actually on the JH engine, the warm up regulator unit sit on a plate that
itself sits on a gasket that is bolted with 2 hex screws.
See picture on and look at item #9
<http://longcoeur.com/scirocco/various/blockjh.jpg>

now the problem is that there is no part number anymore.

Dan if you need one, and your old one is too mangled to make a copy (from
single sheet gasket that you can buy at AutoZone) I have one unused, I can
trace it out for ya on a square of the proper material, and mail to you if
you like. or scan it for you to print and cut up.. either way LMK.

ATS - Patrick Bureau - txrocco@sbcglobal.net
----------------------------------------------
MSN:ATSGTX@hotmail.com |YAHOO:ATSGTX@yahoo.com
ICQ:32918816           |AIM:Texasscirocco
----------------------------------------------


=>-----Original Message-----
=>From: scirocco-l-bounces@scirocco.org
=>[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Dan Bubb
=>Sent: Friday, August 08, 2003 7:21 AM
=>To: Dan Smith; scirocco-l@scirocco.org
=>Subject: Re: need part #
=>
=>
=>I could be wrong, but I don't believe there is a gasket under the warmup
=>regulator/control pressure regulator. I don't think the JH has a
=>hole in the
=>block in this location. Or at least ETKA doesn't show it or any gasket.
=>The ABA and PL have breather holes in the block, but not the JH.
=>Shoot me if I'm wrong.
=>Dan
=>
=>----- Original Message -----
=>From: "Dan Smith" <sad_rocc@yahoo.com>
=>To: <scirocco-l@scirocco.org>
=>Sent: Friday, August 08, 2003 2:32 AM
=>Subject: need part #
=>
=>
=>> I need the part number for a gasket (ETKA part number that is).
=>Ok, let me
=>try to describe it.... Above and to the left of the oil filter/sender unit
=>is the fuel control pressure regulator or something like that. It
=>has 2 fuel
=>lines going into it and connects to the block. I need the seal that is
=>inbetween that and the block, I believe it's where the block-off
=>plate would
=>go. This is for an 84 mk2 8v, JH engine. Hopefully you know what
=>I'm talking
=>about as I need to call a stealership tommorrow to make sure they have it.
=>Also, is it pronounced E.T.K.A. or ET (like let without the 'L') KA?
=>>
=>> TIA,
=>> Dan
=>>
=>>
=>> ---------------------------------
=>> Do you Yahoo!?
=>> The New Yahoo! Search - Faster. Easier. Bingo.
=>> _______________________________________________
=>> Scirocco-l mailing list
=>> Scirocco-l@scirocco.org
=>> http://neubayern.net/mailman/listinfo/scirocco-l
=>
=>
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l