[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TECH] Clutch assembly questions
- Subject: [TECH] Clutch assembly questions
- From: Joe.Doty@lcnetwork.com (Joe Doty)
- Date: Wed, 23 Apr 2003 09:30:40 -0700
12pt 9mm always worked fine on flywheel bolts for me.
Joe Doty
IT/Development
joe@lcnetwork.com=20
> 1. Yes, it is a single piece that acts as a washer for all 6 bolts.
> 2. Special size, washer type head, very fine thread. Dealer item.
> 3. I'd use as thick a grease as possible on the clutch end so it
doesn't
> migrate. The other end is in the tranny and will be lubed with tranny
> fluid.
>=20
> Don't forget locktite (blue) on the PP to crank bolts.
>=20
> Dan