[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[16v] Need a fuel rail (cheaply)...



It's kinda overkill but if you contact www.kinsler.com about their fuel
rail stock, they will cut it for the length you need and even thread the
ends for -8AN fittings.  Kinsler also used to have extensions of various
lengths that you can purchase.

I'm not sure but it would seem that buying their rail, predrilled and
with screw or weld in extensions might just be the cheapest way to go.

We bought some rail stock from then and some aluminum rod stock, made
our own extensions and had a local welder in Seattle assemble the parts

BcH

> -----Original Message-----
> From: scirocco-l-admin@scirocco.org 
> [mailto:scirocco-l-admin@scirocco.org] On Behalf Of Neal Tovsen
> Sent: Friday, April 18, 2003 6:48 AM
> To: joshhignight@techography.net; Scirocco List
> Subject: Re: [16v] Need a fuel rail (cheaply)...
> 
> 
> Good luck. If you find a cheap source for these, let
> us all know!
> 
> Neal
> 
> --- joshhignight@techography.net wrote:
> > I need a cheap fuel rail. I need to be able to run a
> > 3BAR fpr on it, and G60 injectors. It needs to fit
> > over my 16v manifold. I don't care if it's
> > aftermarket or a stock european 16v A3 part.
> > 
> > Thanks,
> > Joshua
> 
> __________________________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo http://search.yahoo.com
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org 
> http://neubayern.net/mailman/listinfo/scirocco-l
>