[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Reconditioning the Block prior to Head Install
Either a soaking in hot caustic chemicals and a jet bath in hot caustic
chemicals.
Brian
----- Original Message -----
From: "T. Reed" <treed2@u.washington.edu>
To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
Sent: Wednesday, April 16, 2003 4:51 PM
Subject: RE: Reconditioning the Block prior to Head Install
> I'm curious, what exactly does hot tanking entail? Chemicals/solvents?
> Heat?
>
> I'm picturing the block glowing cherry red in a furnace then being dunked
> in a strong solvent bath, but I'm sure that's just my imagination :)
>
> -Toby
>
> On Wed, 16 Apr 2003, Drew MacPherson wrote:
>
> >
> > Hot tanking is pretty hard on the intermediate shaft bearing surfaces.
If
> > you get a block hot tanked, you should count on replacing the bearings.
> >
> > Drew
> >
> > On Wed, 16 Apr 2003, ATS - Patrick Bureau wrote:
> >
> > > well if you ave the block torn apart (no pistons etc) you can do what
I did
> > > and drop it off at local machine shop and get a "hot tank" done
> > > it cleans outside and inside for about 50$.
> > >
> > > other than that.. have you tried at autozone, a products called engine
> > > cleaner and detailler CD-2, it worsk REALLY Well for outside skin
jobs.
> > >
> > > ATS - Patrick Bureau - txrocco@sbcglobal.net
> > >
> > >
> > > =>-----Original Message-----
> > > =>From: T Berk [mailto:tberk@mindspring.com]
> > > =>Sent: Wednesday, April 16, 2003 5:56 AM
> > > =>To: Patrick Bureau
> > > =>Subject: Re: Reconditioning the Block prior to Head Install
> > > =>
> > > =>
> > > =>Patrick Bureau wrote:
> > > =>>
> > > =>> I rubbed my head with a drill and a wire brush after I
> > > =>> wiped it down with "fast thinner" it came out nice and
> > > =>> clean and almost shiny. you may want to try that.
> > > =>
> > > =>
> > > =>Yeah, my head got a minor skim at the shop, but the BLOCK has been
out
> > > =>in the elements, albeit under the hood for many months, with a mix
if
> > > =>oil and coolant on it.
> > > =>
> > > =>Thx buddy.
> > > =>TBerk
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> > --
> > /=============================================\
> > | 84 Wolfsburg Edition TurboDiesel Scirocco |
> > | http://scirocco.cs.uoguelph.ca/gtd |
> > \=============================================/
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l