[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Does it fit?: 1.8 16V head on ABA 2.0 block
It works, but it will put compression around 8.0:1 which is nice if you
wanna go to forced induction. I don't think it is as involved as some
of the things you've mentioned, but I haven't done the swap so what do I
know. I do believe you can use a timing belt from a 1.8t on this setup.
koabi
-----Original Message-----
From: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org] On Behalf Of worldcyclist
Sent: Wednesday, April 09, 2003 2:43 PM
To: Scirocco; Scirocco Group
Subject: Does it fit?: 1.8 16V head on ABA 2.0 block
I've been curious about this for awhile, since i have both of these,
however they are on separate engines (both working, too). I don't want
to find out the hard way if it works or not ;-)
Someone told me once that it was necessary to realign the oil feed
galley for the head by filling it and re-drilling to match the block.
Anyone able to elaborate on this?
If it DOES fit w/o excessive mods, I'm interested in buying a 16V head
(if my car sells I'll have to buy a head).
Thanks to you all you die-hards that have probably already done this
swap already.
Gary
80 rocco Callaway Turbo Stage 2+
FS-- 87 16V Scirocco- Wisconsin, $1000
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l