Tach signal / knock sensor power increase?

[rhock99@epix.net (Ryan H)]

Thanks... yeah, reason I got confused is that there is only 6 wires coming out of it... there's one empty connector.

> 
> From: Euroroc II <flaatr@yahoo.com>
> Date: 2003/04/02 Wed PM 04:01:51 EST
> To: Ryan H <rhock99@epix.net>, "toFUNit@yahoo.com" <tofunit@yahoo.com>
> CC: scirocco-l@scirocco.org
> Subject: Re: Re: Tach signal / knock sensor power increase?
> 
> Have an ICM cut open in my office... I count 7 pins on the connector,
> 
> The wire cutting mod (un-tested) is on the knock box I believe.
> 
> -Raffi
> 
> 
> At 12:40 PM 4/2/2003 -0500, Ryan H wrote:
> >Oh, so the ICM is also called the TZH-Box... I suppose that's for 
> >"transistorized ..." box.  But it only has 6 pins (well, at least 
> >according to diagrams - I don't have my car right now).
> >
> > > The TZH-Box is located in the rain tray (driver side).
> > > It controls the ignition...
> > >
> > > /Joel
> > > --- Ryan H <rhock99@epix.net> wrote:
> > > > Patrick, not sure which box you mean... the only two boxes I can find 
> > with 7
> > > > pins are the knock box and KE-Jetronic box...
> > > >
> > > > >
> > > > > From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
> > > > > Date: 2003/04/02 Wed AM 11:55:13 EST
> > > > > To: "Ryan H" <rhock99@epix.net>,
> > > > >   <scirocco-l@scirocco.org>
> > > > > Subject: RE: Tach signal / knock sensor power increase?
> > > > >
> > > > > humm i though the TAch signal (rpm) was the pin 7 of the TZH box 
> > not the
> > > > > knock box.
> > > > >
> > > > > ATS - Patrick Bureau - txrocco@sbcglobal.net
> > > > >
> > > > >
> > > > > =>-----Original Message-----
> > > > > =>From: scirocco-l-admin@scirocco.org
> > > > > =>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Ryan H
> > > > > =>Sent: Tuesday, April 01, 2003 11:20 PM
> > > > > =>To: scirocco-l@scirocco.org
> > > > > =>Subject: Tach signal / knock sensor power increase?
> > > > > =>
> > > > > =>
> > > > > =>OK guys, can someone tell me what wire to/from the knock box
> > > > > =>(16V) is the tach signal?  And also, look at this pic.... in the
> > > > > =>bottom right it says something about increasing power by
> > > > > =>unconnecting two grounds... um, anyone try this?  Where are they
> > > > > =>connected together?  At the harness connection?
> > > > > =>http://home.mindspring.com/~tberk/_uimages/Knock-Sensor-Diagram.JPG
> > > > > =>
> > > > > =>
> > > > > =>_______________________________________________
> > > > > =>Scirocco-l mailing list
> > > > > =>Scirocco-l@scirocco.org
> > > > > =>http://neubayern.net/mailman/listinfo/scirocco-l
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Scirocco-l mailing list
> > > > > Scirocco-l@scirocco.org
> > > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Scirocco-l mailing list
> > > > Scirocco-l@scirocco.org
> > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Tax Center - File online, calculators, forms, and more
> > > http://tax.yahoo.com
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> >
> >_______________________________________________
> >Scirocco-l mailing list
> >Scirocco-l@scirocco.org
> >http://neubayern.net/mailman/listinfo/scirocco-l
> 
>