[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
transmission final drive swaps
f/d 1 2 3 4 5
9A 3.67 3.45 2.12 1.44 1.13 0.89
FO 3.89 3.45 1.94 1.29 0.91 0.71
No go, Anson.
1st and 2nd gears are ground right onto the pinion shaft. Since 2nd
gear is different, you can't use the 9a's complete gearset. (first
gears are all the same ratio).
You'd need the pinion shaft from a 4K, 2H, FK, FM, or AEN. Good luck
on those last two!
Ron
--- Anson Clement <anarchistbooty@hotmail.com> wrote:
<HR>
<html><div style='background-color:'><DIV>I'm putting a chameleon
tranny together right now, a real frankenstien. I hope to assemble
something with a 9A gear set, an FO fifth, .71 and an FO ring and
pinion shaft. I'm pretty sure everything will go together except for
the FO pinion. anybody try this yet? FO's are a bit of a wierd thing
they come with 90mm flanges and the case to shaft sealing surfaces on
the output flanges are way smaller than the normal 020's I'm using ACN
spiders and cage so I can use a normal 020 box. I just don't know if
the 9A gears will go onto the FO pinion shaft.</DIV>
<DIV> </DIV>
<DIV>Are rabbit right and left side engine mounts compatible with
rocco's? I would like to have a new set of mounts pressed and ready for
the swap and bunny mounts are plentifull.</DIV>
<DIV> </DIV>
<DIV>thanx in advance </DIV>
<DIV> </DIV>
<DIV>anson 86 8v</DIV></div><br clear=all><hr>MSN Photos is the easiest
way to share and print your photos: <a
href='http://g.msn.com/1HM1ENUS/c156??PI=44364'>Click
Here</a><br></html>
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com