control arm mount Q...followup

[djsteveyk@shaw.ca (Jody Bailey)]

Well I took the collective advice of all suggestions and got those suckers 
off without any bolt in the middle.  For those who might encounter this 
problem...
1. Use a wire brush on a drill to remove all the rust and dirt from the 
bolt. -thanx scirocco-AL
2. Soaked in liquid wrench one last time
3. Torch for some heat
4. Then use an impact...voila.

Fairly simple I guess...I think the impact was the clincher.  Thanx for the 
help kids!

Jody Bailey
82 Scirocco 2L 8v