On Topic: 16V port work, and odd photo request

[amalventano1@comcast.net (Allyn)]

i got ya covered, ron
manifolds coming out the wazoo here
part central lately as i've been collecting for the twin.
Al

----- Original Message ----- 
From: "Ron Pieper" <rapieper@yahoo.com>
To: <scirocco-l@scirocco.org>
Sent: Wednesday, September 11, 2002 4:46 PM
Subject: On Topic: 16V port work, and odd photo request


> I'm progressing well with a "cleanup" port job on a 16V 2.0L cylinder
> head, which will of course go on top of my 9A block setting here in the
> garage.  As mentioned, this is a cleanup, no massive hogging or stuff
> like that.  Conservative is best, and VW engineers know more than me.
> 
> I'm ready to start looking at intake ports, and the area in the head
> where the injector sprays is really nasty looking.  It's pointless to
> grind on this before I know what the internals look like, so if anyone
> has/could take a shot of the lower manifold with the injectors
> installed, from the head end, I'd appreciate it. 
> 
> Of course, if anyone has an entire intake manifold from a Scirocco that
> I could borrow and return in some months in the form of the unmodified
> manifold on Victor right now...that'd be better...exhaust too...
> 
> TIA, and educated advise always appreciated (except if it's "don't port
> your own head" - too late for that).
> 
> Ron
> 
> =====
> Cheapass Ron
> '87 Scirocco 16'Victor'
> 
> __________________________________________________
> Yahoo! - We Remember
> 9-11: A tribute to the more than 3,000 lives lost
> http://dir.remember.yahoo.com/tribute
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l