shifter adjustment

[Larry" <rocco16v@netzero.com (Larry)]

...and it sure won't hurt to make sure all the bushings, etc. are at minimum
slop.

Larry

> Ken B wrote:
> >
> > The bentley says the distance between the shift finger and the lockout
plate
> > (under the car per Bentley 8-9) should be 15mm.  When mine is as close
to
> > that as I can get it (pretty dang close a mm or so) the stop finger hits
the
> > lockout plate before the shifter can reach over farenough to line up so
it
> > will go "up" into 1st gear.
> <snip>
>
>
>
> Did you 1st adjust the plate inside the car to determine it's centered
> or not?
>
> There should be two holes you find once you pry up the shift boot. They
> line up with two holes in the chassis tunnel.
>
> THEN try the rest of the adjustments in the Bentley.
>
>
> hth,
> TBerk
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>

-------------------------------------------
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today! www.netzerolongdistance.com