Swapping Hydro Heads

[tberk@mindspring.com (T Berk)]

SailingFC@aol.com wrote:
> 
> Tosha,
> Go back and get those bearing caps, now.  You should keep the cam
> bearing caps with the head.  When a head is bored for the cam, the cam
> bearing caps become specific for that head and for the locations they
> are in when bored.  That's why the caps have the location number on
> them and you should NOT turn them around when reinstalling.  You might
> snap a cap or cause binding of the cam if you use cap other than the
> ones that were machined with it.
> 
> -Dick-



Got it, I'm going over that way tomorrow, I'll have them then.

Thx to Dick & Ron for the info.

TBerk