Front spring noise

[flaatr@yahoo.com (Euroroc II)]

This is very true, the bearings should be checked... I recently had this 
problem and it was flatted perches. I replaced the passenger side but now 
my driver side is popping from time to time, I should have done them both 
at the same time... My fault.

-Raffi


At 05:15 PM 10/8/02 -0400, Rick Alexander wrote:
>I read your post with interest as I have noises in the front of Rolling Roc.
>When you said it was a clunk, that's what my noise is. In my case however
>its wasted bearings. Are yours healthy?
>
>Rick Alexander
>http://www.brubakerbox.com
>http://clubs.hemmings.com/hams/
>http://clubs.hemmings.com/vwsrus/
>
>----- Original Message -----
>From: <calimus@techography.net>
>To: <Scirocco-l@scirocco.org>
>Sent: Tuesday, October 08, 2002 10:38 AM
>Subject: Front spring noise
>
>
> >    A few weeks ago I put some H&R sport springs on my 88' 16v.  I love the
>ride but I have one nagging problem.  The drivers side front sping makes
>some noise and small/sharp bumps.  I've checked it and what seems to be
>happening is thats kinda moving around on the upper perch.  It's seated
>correctly on the lower, but the upper one is allowing it to shoft around a
>bit and it makes one of the worst noises.
> >
> > So I'm looking for a way to fix this as the passenger side doesn't make
>any noise at all.  Do I need to find another perch?  What are my options as
>this clunking is really getting on my nerves.
> >
> > William Snyder
> >
> > 88 Scirocco 16v
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l