rear camber problems??

[skerocdriver@juno.com (Shawn c Meze)]

On Fri, 4 Oct 2002 13:46:00 -0500 "ATS - Patrick Bureau"
<pbureau@attbi.com> writes:
> Yes you can buy shims to set the camber right, a real pain in the arse,
you
> have to take the stub axle off, insert shim reasse,ble entire brakes
system
> back on the axle, and re-align...alignment shop usually charge anywhere
from
> 200-400$ because of the pita it is.



no-no-no. Its actually fairly easy. remove the drum, remove 4 bolts and
you can pop the backing plate and spindle out enough to shim it. The 4
bolts arent exactly right there as you have to fight to get them out but
they do come out without total dissassembly. Assembly in reverse of
removal. Dont forget to brake clean everything before the drums go back
on.  


Shawn Méze
86' Jetta GLi 8V   88' Corvette -SS- #30  2001 SDR Solo2 Champion
Scirocco" 84' Scirocco 8V 82' Scirocco RIP 80' Scirocco S 79' "Project
FSP
The Fastest, Quickest, Cleanest and best looking Scirocco(s) in all of
San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.