Cleaning Fuel Injectors w/Brake Parts Cleaner?

[Larry" <rocco16v@netzero.com (Larry)]

Clorinated, of course.  It works better (they take the good stuff like that
out because of the environment....meowuuuuu)
ANYTHING advertised as "non-" is a poor choice. (non-fat, etc.)
:)

Larry

----- Original Message -----
From: Kenneth & Georgianna Robinson <krobins2@twcny.rr.com>
To: Leach, Michael <michael.leach@lmco.com>; 'Larry' <rocco16v@netzero.com>
Cc: <scirocco-l@scirocco.org>
Sent: Friday, May 24, 2002 7:17 AM
Subject: Re: Cleaning Fuel Injectors w/Brake Parts Cleaner?


> Any particular brand & size can of brake parts cleaner?? Chlorinated or
> Non-Chlorinated?? Thanks! Ken R.
> ----- Original Message -----
> From: "Leach, Michael" <michael.leach@lmco.com>
> To: "'Larry'" <rocco16v@netzero.com>
> Cc: <scirocco-l@scirocco.org>
> Sent: Friday, May 24, 2002 6:30 AM
> Subject: RE: Cleaning Fuel Injectors w/Brake Parts Cleaner?
>
>
> > Problem Found!!!!
> >
> > you need to use  a *NEW* can of Parts Cleaner with lots of
pressure...and
> > you get the pretty misting action....very impressive
> >
> > Michael Leach
> > LAMPS Integration and Test
> > Lockheed Martin Federal Systems
> > Owego, NY 13827
> > 607-751-7542
> > FAX 751-6198
> > michael.leach@lmco.com
> >
> >
> >
> > -----Original Message-----
> > From: Larry [mailto:rocco16v@netzero.com]
> > Sent: Thursday, May 23, 2002 7:30 PM
> > To: Leach, Michael
> > Subject: Re: Cleaning Fuel Injectors w/Brake Parts Cleaner?
> >
> >
> > You be right; not enough pressure.
> >
> > Larry
> > Senior Engineering Technician
> > GKN Aerospace Chem-tronics, Inc.
> > (yes, the same GKN that probably made your CV joints....)
> >
> > > I don't remember who it was that said they cleaned their injectors by
> > > spraying brake parts cleaner into the inlet but I tried this and
nothing
> > > came out the end of the injector.  It all just came back out on the
> inlet
> > > side.   I was really hoping to do this and see the misting pattern and
> > know
> > > that the injectors were fine.  What am I missing here?...do I need
more
> > > pressure to make the injector mist?
> > > Michael Leach
> > >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
>
>