Valve Lash? Camshaft malfunction?

[Larry" <rocco16v@netzero.com (Larry)]

Pull the valve cover and look.  A 'knock' is serious.
Just don't be surprised if it is coming from the block...it's difficult to
determine the source of engine noises sometimes.

Larry  sandiego16V

> hey list,
>
> i'm having a quite bizzare problem with my 16v. sounds like
> something in the head is going wack.
>
> while driving, when i apply minor amounts of throttle
> i'll hear it. if i floor it, it'll start later on in the powerband.
> also when i release my foot off the gas slowly it'll do it also.
> it sounds like a metallic knock coming from directly in the middle
> of the head. it'll also do it when the car isn't under load. it
> usually occurs around 3500 rpm's.
>
> another odd thing. my old motor (the one i had in last year) used
> to do the same thing. the motor that i have in now makes the exact
>   same noise and it's a completly different motor. one thing that occured
> to me this evening is that i'm running Schrick 260/276 cams and when
> you buy schricks, there are no dots on the sprokets to line them up. the
> guy that i bought the cams from had premade dots on them, so under
> my assumption, i figured that they we're ready to go. it's is possible
that
> they're not lined up in the head? i figure it's most probably the cams
> because they we're in my old motor also.
>
> i'm also running a Kent Cam Sproket that is set at dead stock.
>
> help me out! i'm blowin my mind!
>
> thanks
>
> paul
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>