filling in the seams

[Larry" <rocco16v@netzero.com (Larry)]

Hit/Earl-
Unless that seam is welded completely before you try to fill it,  you will
have cracking issues regardless of what you fill with.
Larry   sandiego16V


> You'll first want to make sure you inhibit the rust or else it'll come
back
> through.  Don't ever use bondo over 1/8 inch or it'll crack.  Best thing
to
> use is a 2 part epoxy.  Duramix, Sem, 3M, Fusor, etc. are a few to name
> which will work fine.
> -Earl
>
> >while changing over to euro bumpers i noticed a little rust on the back
end
> >that i'd thought i'd take care of while i'm at it. the rust spot is right
> >next to one of the seams on the rear end, so i got to thinking that i
could
> >fill over these seams and go for that seamless look. has anyone tried or
> >done this? i'm concerned about the bondo not holding.
> >  hit