Lightened Flywheels + twin tech design stuff

[sfwilliams@comcast.net (Scott F. Williams)]

> as soon as i verify that water wont kill a cis fuel pump, thats
> what im using. I also plan on the
> charge-cooler circuit being part of the fuel (water) pump circuit
> (killing like 50 birds with one
> stone there).

Yo, Allyn. Keep in mind that you'll need to run purified water in the water
injection system. The little bits of schmutz that inhabits water out of the
tap will clog the misting nozzles. So, you might not get away with useing
the same water supply as for the intercoolers. Well... unless you feed the
intercoolers the good stuff, too. But, that could get expensive. That also
assumes that you could keep it all totally clean. -dunno 'bout that. The
water injection also works a lot better when you mix denatured alcohol (or
methanol) in there 50/50.

Anyway, there's more food for thought.
--
Scott F. Williams
NJ Scirocco nut
'99 Subaru Impreza 2.5 RS
Mazda 323 GTX turbo "assaulted" vehicle
Golf GTI 16v "rollycar"
ClubVAC: "Roads found. Drivers wanted."

Check out our rally team's website!
http://www.usrallyteam.com