[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cross drilled rotors Scott Williams is WRONG!

Subject: cross drilled rotors Scott Williams is WRONG!
From: brett@netacc.net (Brett Van Sprewenburg)
Date: Sat, 23 Mar 2002 21:58:50 -0500
In-reply-to: <009c01c1d2da$c78d1520$7a01a8c0@adf>
References: <IMEIILEDMBCOMEJNDNBIAEMKCJAA.pbureau@attbi.com><v0421010ab8c27f51fb02@[192.168.1.105]><009701c1d2bd$e1f0ef80$35121f41@insight.rr.com><v0421010fb8c2970b8f5d@[192.168.1.105]><009c01c1d2da$c78d1520$7a01a8c0@adf>

>For the biggest bang for the buck, put the biggest rotors and the biggest
>caliper you can fit in your wheel and don't worry about holes/slots.  That's
>the bottom line.  1000 race car builders can't be all wrong.

You're also quite incorrect.  Go to the link I just posted an read on...

>
>Larry  sandiego16V

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '92 Passat 16v (Winter+) | - brett@netacc.net

Follow-Ups:
- cross drilled rotors Scott Williams is WRONG!
  - From: brianm@zbt62.eastnet.gatech.edu (Brian McGarvey)

References:
- cross drilled rotors Scott Williams is WRONG!
  - From: pbureau@attbi.com (ATS - Patrick Bureau)
- cross drilled rotors Scott Williams is WRONG!
  - From: brett@netacc.net (Brett Van Sprewenburg)
- cross drilled rotors Scott Williams is WRONG!
  - From: Scirocco-Al" <scirocco-Al@insight.rr.com (Scirocco-Al)
- cross drilled rotors Scott Williams is WRONG!
  - From: brett@netacc.net (Brett Van Sprewenburg)
- cross drilled rotors Scott Williams is WRONG!
  - From: Larry" <rocco16v@netzero.com (Larry)

Prev by Date: My little beastie is sick
Next by Date: Gear oil?
Previous by thread: cross drilled rotors Scott Williams is WRONG!
Next by thread: cross drilled rotors Scott Williams is WRONG!
Index(es):
- Date
- Thread