water injection

[amalventano1@comcast.net (Allyn)]

cis pump is fuel lubricated, and the seals probably wouldnt like water. water+alcohol might be a
different story. as far as corrosion, as long as it stays primed with no air in the system it
shouldnt rust.
Al

----- Original Message -----
From: "Scott F. Williams" <sfwilliams@comcast.net>
To: "Allyn" <amalventano1@comcast.net>; "Scirocco List" <scirocco-l@scirocco.org>
Sent: Thursday, March 21, 2002 11:33 AM
Subject: RE: water injection


> Allyn, can you suggest any sources of very high-pressure pumps? I agree that
> keeping a really high pressure is the key to proper atomization. Hell, can a
> CIS fuel pump do the trick? That is, can it work with water without rusting
> to death?
> --
> Scott F. Williams
> NJ Scirocco nut
> '99 Subaru Impreza 2.5 RS
> Mazda 323 GTX turbo "assaulted" vehicle
> Golf GTI 16v "rollycar"
> ClubVAC: "Roads found. Drivers wanted."
>
> Check out our rally team's website!
> http://www.usrallyteam.com
>
> Allyn wrote:
> > Scott,
> >     You need high pressure for proper atomization in a water
> > injection applicaion. Something like 30
> > pounds or so.
>
>